HURST eDRAULIC SP 333 E2 - Page 30

30
1. Closetherescueunituntilagapofonlyafewmmremainsbetweenthetips.Now
switcho󰀨thedeviceandremovethebatteryorunplugthepowersupplyfromthe
device.Cleantherescueequipmentcarefully.
2. Removethexingscrews“A”andremovetheprotectiveplates“B”.
9.3.5 Replacing the protective plates
3. Installthenewprotectiveplates.
A
B
A