APPENDIX
9, 14,3
VER.V09F
SECTION 9. 14
After confirming the selections and exting from INSTALL, the
three files:
WS,CCT-1
WSMSGS,OVR
WSOVLY1 .OVR
are ready to be loaded and run, see Section 3,6 for details of
the procedure,
SuperCalc Version 1
The standard disk from Sorcim has the following files:
INSTALL, CCT-1
SC.COM
SC.OVL
SC,HLP
The INSTALL program is used to configure the main program
SC.COM, The two other files SC.OVL and SC.HLP do not need any
alteration.
It will be helpful to refer to the SuperCalc manual when using
INSTALL.
However, below is set out the response to each menu choice to
install for the HUNTER, after running the "INSTALL.COM" program.
a) Terminal Selection Menu
No automatic installation is provided for HUNTER. Type in
'x' (not specified on the screen) for manually setting up
the various options,
A second menu is displayed showing options A-F, Each option
should be configured as described.
A, EDIT SCREEN CONTROLS
Another menu is displayed. Choose each option in turn and
modify as prompted until the following is displayed:
Clear Screen : 1,01
-2. Clear to.EOL: Unconfigured
3 Home cursor: Unconfigured
Return to the main selection and run by pressing x.
PAGE 9 - 52
To Next Page
Loading...