Husqvarna 351 G User Manual

Workshop manual
101 90 26-26
340, 345, 350
346XP, 351
Front 340-351 Eng 99-04-15, 15.461

Husqvarna 351 G Specifications

General

Brand	Husqvarna
Model	351 G
Category	Chainsaw
Language	English

Summary

Workshop Manual

Safety Regulations

Special Safety Instructions

Specific safety warnings and precautions for operation.

Technical Data

Construction and Function

Troubleshooting

Troubleshooting Common Faults

Lists common faults affecting chainsaws and their potential causes.

Troubleshooting Acceleration and Stalling

Diagnosing issues related to acceleration, retardation, and engine stalling.

Repair Instructions

Chain Brake - Dismantling Procedure

Step-by-step guide to removing the chain brake assembly.

Chain Brake - Reassembly and Testing

Steps for reassembling the chain brake and performing an operating test.

Carburettor Removal Procedure

Step-by-step guide for removing the carburettor assembly.

Carburettor Dismantling Details

Detailed steps for dismantling the carburettor and its components.

Carburettor Cleaning and Reassembly

Procedure for cleaning and reassembling the carburettor.

Carburettor Pressure Testing and Refitting

Steps for pressure testing and refitting the carburettor.

Carburettor Adjustment Procedures

Guide to adjusting the carburettor for optimal performance.

Carburettor Basic Settings and Fine Adjustment

Instructions for initial carburettor settings and fine-tuning.

Carburettor Adjustment Requirements and Jets

Details on basic requirements, L, H, and T jet adjustments for carburettor tuning.

Piston and Cylinder Removal Procedure

Step-by-step guide for removing the piston and cylinder assembly.

Piston and Cylinder Refitting

Procedure for refitting the piston and cylinder assembly.

Cylinder Pressure Testing Procedure

Crankcase and Crankshaft Dismantling (350/345/340)

Crankcase and Crankshaft Reassembly (350/345/340)

Crankcase and Crankshaft Dismantling (346XP/G, 351/G)

Crankcase and Crankshaft Reassembly (346XP/G, 351/G)