English – 23
E
Description of modification measures
1. Disconnect the cable connector to relay K1
and K2.
2. Cut off cable 37 (green) just where it connects to
terminal #30 on cable connector of relay K2.
(Cable 37 is connected to the same terminal as
cable 22 [green]).
3. Connect cable 37 to cable 21 (dark blue), which
is connected to terminal #87 on the cable
connector of relay K2. Join the cables together
with an insulated cable shoe.
4. If the cables are to be soldered together the joint
is to be insulated with electrical tape.
5. Plug in the cable connectors to relay K1 and K2.
ELECTRICAL SYSTEM
32
37
40
22
28
34
14
12
21
41
33
37
30
85
87a
86
87
30
85
87a
87
86
37
K1
K2
3
2
Eng-3 sidan 1-54 97-04-11, 15.3823
To Next Page
Loading...
