Husqvarna RB150 - Changing the Steering Spindle; Steering System

80 – English
E
STEERING SYSTEM
Description
1. Left steering spindle
2. Left tie rod elbow
3. Right steering spindle
4. Tie rod
5. Right tie rod elbow
6. Front steering rod elbow
7. Steering connecting rod
8. Rear steering rod elbow
9. Steering gear sector
10. Steering pinion
11. Steering column
12. Lower steering column bearing
1
2
3
4
5
6
7
8
9101112
Changing the steering spindle
Dismantling
WARNING
The riding mower may never be
lifted more than 50 cm from a level
position unless the following
precautions are taken:
1. Drain fuel from the engine and
run the engine until the carburettor
is dry.
2. Remove the battery.
3. Drain oil from the crankcase.
1. Use a jack, and block up the front of the tractor
and block up with two stands. (See page 3)
!
Eng-4 sidan 55-102 97-04-11, 15.4080