ELECTRICAL SYSTEM 15
189
F00604-11
–
Mount and tighten screws
4
.
Guideline
Screw, headlight
mask
M5 5 Nm (3.7 lbf ft)
–
Mount the brake line and wiring harness in holder
5
.
Finishing work
– Check the headlight setting. ( p. 192)
15.9 Changing the headlight bulb
Note
Damage to reflector Grease on the reflector reduces the light intensity.
Grease on the bulb will evaporate due to the heat and be deposited on the reflector.
– Clean and degrease the bulbs before mounting.
– Do not touch the bulbs with your bare hands.
Preparatory work
– Remove the headlight mask with the headlight. ( p. 187)
To Next Page
Loading...
Need help?
General
