10 SERVICE SCHEDULE
84
10.1 Additional information
Any further work that results from the compulsory work or from the recommended work must be ordered sepa-
rately and invoiced separately.
Different service intervals may apply in your country, depending on the local operating conditions.
Individual service intervals and scopes may change in the course of technical developments. The most up-to-
date service schedule can always be found on Husqvarna Motorcycles Dealer.net. Your authorized Husqvarna
Motorcycles dealer will be glad to advise you.
10.2 Required work
every 24 months
every 12 months
every 20,000 km (12,400 mi)
every 10,000 km (6,200 mi)
after 1,000 km (620 mi)
Read out the fault memory using the Husqvarna Motorcycles diagnostics tool. ○ ● ● ● ●
Program the shift shaft sensor. ○ ● ● ● ●
Check that the electrical system is functioning properly. ○ ● ● ● ●
Change the engine oil and the oil filter, clean the oil screens. ( p. 215) ○ ● ● ● ●
Check the front brake linings. ( p. 143) ○ ● ● ● ●
Check the rear brake linings. ( p. 150) ○ ● ● ● ●
Check the brake discs. ( p. 138) ○ ● ● ● ●
Check the brake lines for damage and leakage. ○ ● ● ● ●
To Next Page
Loading...
Need help?
General
