4.5
Item Cose Function Description Component Component
as on Manufacturer Number
S-25A Sch.
5PB Feed Force Limit Operating heaf (yellow flush Telemecanique ZB2BA5
setting push style)
button 1 NO contact block Telemecanique ZB2BE101
6PB Index Forward Booted push button operator Telemecanique XACB9212
push button 2 speed 2 contact block assembly
1 NO, 1 NO early close Telemecanique XENB1181
7PB Index Reverse Booted push button operator Telemecanique XACB9212
push button 2 speed 2 contact block assembly
1 NO, 1NO early close Telemecanique XENB1181
1SS Mode Operation head (3position Telemecanique ZB2BJ3
Man/Off/Auto maintained, long)
selector switch 1 NO early close Telemecanique ZB2BE201
1 NC late open Telemecanique ZB2BE202
1 NO Telemecanique ZB2BE101
2 NC Telemecanique ZB2BE102
2SS Head Operating head (3 position Telemecanique ZB2BJ3
Up/Hold/Down maintained, long)
selector switch 2 NO contact blocks Telemecanique ZB2BE101
3SS Coolant Operating head (3 position Telemecanique ZB2BD3
selector switch maintained)
2 NO contact blocks Telemecanique ZB2BE101
4SS Fixed Vise Operating head (3 position, one Telemecanique ZB2BJ7
selector switch maintained, one spring return to
center, long)
2 NO contact blocks Telemecanique ZB2BE101
5SS Shuttle Vise Operating head (3 position, one Telemecanique ZB2BJ7
selector switch maintained, one spring return to
center, long)
2 NO contact blocks Telemecanique ZB2BE101
6SS Blade Tension Selector switch and housing Telemecanique XALJ133
selector switch assembly (3 position maintained)
2 NO contact blocks Telemecanique ZB2BE101
7SS Slow Head Operating Head (3 position with Telemecanique ZB2BD5
Swing selector spring return to center)
switch 2 NO contact blocks Telemecanique AB2BE101
8SS Fast Head Operating Head (3 position with Telemecanique ZB2BD5
Swing selector spring return to center)
switch 2 NO contact blocks Telemecanique AB2BE101
9SS PLC on/off Operating head (standard 2 position Telemecanique ZB2BJ2
selector switch maintained)
1 NO contact blocks Telemecanique ZB2BE101
To Next Page