SECTION 8 - SPECIFICATIONS
SPACIFICATION LIST
MODEL S-25A DIMENSIONS ( IMPERIAL)
Capacity: Round 18" Diameter
Rectangular 18" high, 27" wide
At 45° angle Round 18" Diameter
At 30° angle Round 12" Diameter
Blade:Length 18' 10"
Width 1 1/2", 1 1/4" (optional)
Thickness .050" (.042", 1/14" blade)
Blade speed 75-400 SFM (infinitely variable)
Blade tension Hydraulic
Blade guides Carbide (coolant lubricated)
Blade wheel diameter 22"
Motors Blade drive 10 HP
Hydraulic drive 3 HP
Pumps Hydraulic pump Pressure compensated
constant pressure variable flow
(6.5 GPM)
Coolant pump 3.5 GPM (150W)
Hydraulic tank 17 US Gal.
Hydraulic system pressure 900 p.s.i.
Vise control Hydraulic
Shuttle stroke 0-40" single stroke
Multi shuttle capability of up to 99 strokes
Table height 36"
Control panel Waist height
Outfeed table 32" L x 22" W
Machine weight 7300 lbs.
Maximum work load 8000 lbs.
Overall dimensions 111" wide
160" long
72" high
8.1
To Next Page