SECTION 9 - WARRANTY
Hyd-Mech Engineering Ltd. warrants each new S-25A bandsaw to be free from failure resulting from defective
material and workmanship under proper use and service for a period of one year following the date of shipment
to the user. Hyd-Mech's sole obligation under this warranty is limited to the repair or replacement without
charge, at Hyd-Mech's factory, warehouse, or approved repair shop any part or parts which Hyd-Mech's inspec-
tion shall disclose to be defective. Return freight must be prepaid by the user.
This warranty in its entirety, does not cover maintenance items, including but not limited to lubricating grease
and oils, filters, V-belts, saw blades, etc., nor any items therein which show signs of neglect, overloading,
abuse, accident, inadequate maintenance, or unauthorized altering.
MOTOR, GEARBOX, PUMP, ELECTRIC COMPONENTS, VALVES, HOSES, FITTINGS, and any other items
used in the manufacture of the S-25A, but not originally manufactured by Hyd-Mech are subject to the original
manufacturer's warranty. Hyd-Mech will provide such assistance and information as is necessary and available
to facilitate the user's claim to such other manufacturer.
Liability or obligation on the part of Hyd-Mech for damages, whether general, special or for negligence and
expressly including any incidental and consequential damages is hereby disclaimed. Hyd-Mech's obligation to
repair or replace shall be the limit of its liability under this warranty and the sole and exclusive right and remedy
of the user.
THIS WARRANTY IS EXPRESSLY IN LIEU OF ALL OTHER WARRANTIES, EXPRESSED OR IMPLIED,
WRITTEN OR ORAL, INCLUDING WITHOUT LIMITATION ANY IMPLIED WARRANTIES OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
This warranty may not be changed, altered, or modified in any way except in writing by Hyd-Mech.
HYD-MECH ENGINEERING LTD.
239 Beards Lane
P.O. BOX 1030
Woodstock, Ontario
N4S 8A4
Phone: (519) 539-6341
9.1
To Previous Page