Qualifications of personnel / target group
Persons who work on the sensor must be familiar with the associated
hazards when using it.
Auxiliary and specialist personnel must have read and understood the
operating instructions, in particular the safety information and instructions,
and applicable regulations before beginning work.
The operating instructions and applicable regulations are to kept so they are
accessible for operating and specialist personnel.
These operating instructions are intended for:
Auxiliary personnel: such persons have been instructed about the sensor
and are aware of potential hazards due to improper use.
Specialist personnel: such persons with corresponding specialist training
and several years' work experience. They are able to assess and perform the
work assigned to them, they are also able to recognize potential hazards.
ContaminationSensor CS1000
en(us)
Page 14 / 136
BeWa CS1000 3764916d 300 en-us 2017-09-25.docx 2017-09-25
To Next Page
Loading...
