Hypertherm Powermax 30 User Manual

Hypertherm Plasma Systems 1-1
8-06
Section 1
SAFETY
In this section:
Recognize safety information ...................................................................................................................................1-2
Follow safety instructions..........................................................................................................................................1-2
Cutting can cause fire or explosion...........................................................................................................................1-2
Electric shock can kill................................................................................................................................................1-3
Static electricity can damage circuit boards..............................................................................................................1-3
Toxic fumes can cause injury or death......................................................................................................................1-4
A plasma arc can cause injury and burns.................................................................................................................1-5
Arc rays can burn eyes and skin...............................................................................................................................1-5
Grounding safety ......................................................................................................................................................1-5
Compressed gas equipment safety ..........................................................................................................................1-6
Gas cylinders can explode if damaged.....................................................................................................................1-6
Noise can damage hearing.......................................................................................................................................1-6
Pacemaker and hearing aid operation......................................................................................................................1-6
A plasma arc can damage frozen pipes....................................................................................................................1-6
Additional safety information.....................................................................................................................................1-6
Warning labels ..........................................................................................................................................................1-7

Hypertherm Powermax 30 Specifications

General

Gas Pressure	5.2 bar (75 psi)
Torch	Hand Torch
Input Voltage	120-240 V
Input Phase	1
Current Output	20-30 A
Cutting Thickness	10 mm (3/8 inch)
Max Severance Thickness	16 mm (5/8")
Max Clean Cut Thickness	10 mm (3/8 inch)
Weight	9.5 kg (21 lbs)
Gas Type	Air
Dimensions	356 mm D x 168 mm W x 305 mm H (14" D x 6.6" W x 12" H)