Hypertherm powermax600 - PAC123 M Machine Torch Setup

SETUP
powermax600
Operator Manual 3-7
P
A
C
123M
.06
Pigtail from Machine
Torch Lead
On/Off Pendant
PAC123M ON/OFF Pendant Connection
PAC123M Torch Alignment
Mount the machine torch perpendicular to the workpiece in order to
get a vertical cut. Use a square to align the torch at 0° and 90°.
PAC123M Machine Torch Setup
Socket A White Wire
Socket B Not Used
Socket C Black Wire
Torch
0°
90°