Hypertherm powermax600 - Hand Torch Operation

OPERATION
10-99
powermax600
Operator Manual 4-7
Hand Torch Operation
WARNING
INSTANT-ON TORCHES
PLASMA ARC CAN CAUSE INJURY AND BURNS
Plasma arc comes on immediately when the torch switch is activated.
The plasma arc will quickly cut through gloves and skin.
• Keep away from the torch tip.
• Do not hold the workpiece, and keep your hands clear of the cutting path.
• Never point the torch toward yourself or others.
Safety Trigger Operation
Avoid firing the torch when it is
not in contact with the workpiece.


