Hypertherm powermax600 User Manual

SETUP
3-2 powermax600 Operator Manual
Lifting Power Supply
WARNING
The power supply weighs up to 54 lb / 25 kg. Do not lift the power supply by ONE handle. The
handle can break, resulting in injury and damage to the power supply.
Power Hookup
Check Required Input Voltage
Look at U1 on the data plate to check input voltage requirements.
The data plate is on the back of the power supply.
54 lb
25 kg
Hoist
Cover in place
Approved
hoisting strap.
Keep as vertical
as possible

Hypertherm powermax600 Specifications

General

Brand	Hypertherm
Model	powermax600
Category	Welding System
Language	English