Hypertherm SYNC Powermax 85 User Manual

Install and Set Up the Plasma Power Supply
2
Powermax65/85/105 SYNC Operator Manual 810470 61
Hypertherm offers the following optional external filter kits:
 Kit 128647: The Eliminizer moisture removal air filter removes water and dirt from the gas
supply. For more information, refer to the Optional Air Filter Kit and Element Replacement
Procedure Field Service Bulletin (804180).
 Kit 428719: The oil removal air filter removes oil, oil vapor, and dirt from the gas supply.
For more information, refer to the Optional Oil Removal Air Filter Kit and Element
Replacement Field Service Bulletin (809610).

For additional parts related to these filter kits, refer to the
Powermax65/85/105 SYNC Parts Guide (810490).
If you use both external filters, install them in the order shown in Figure 4 to prevent damage to the
gas line and equipment.
Figure 4 – Optional Hypertherm external filters
1
2
1
2

Hypertherm SYNC Powermax 85 Specifications

General

Brand	Hypertherm
Model	SYNC Powermax 85
Category	Welding System
Language	English