5. Status Indications
5.1 OLED Icons
5.1.1 Basic Status
The radio detects no signal.
The number of bars indicates the signal strength.
In single BS mode, the number of bars indicates the signal strength.
The radio is in emergency mode.
The radio is scanning or hunting.
The radio stays on an active channel.
The radio stays on Priority Channel 1.
The radio stays on Priority Channel 2.
The radio operates in low power mode.
The radio operates in high power mode.
More bars indicate more remaining battery power.
The battery power runs out. Recharge or replace the battery.
The TF card is nearly full.
The BT feature is enabled.
A BT device is connected.
The GPS feature is enabled, and valid positioning data has been received.
The GPS feature is enabled, but no valid positioning data has been received.
The radio operates in conventional mode.
The radio operates in digital trunking mode.
To Next Page
Loading...
