key, and then press and hold the
PTT
key.
Trunking Mode
On the home screen, press and then rotate the
Smart Knob
to select the contact, and then press the
PTT
key.
With the One Touch Call feature preprogrammed by your dealer, press the preprogrammed
One Touch Call
key.
6.1.2 Receiving a Call
Receiving a Group/Broadcast/All Call
You can answer a group, a broadcast call, or an all call without any operation.
Receiving a Private Call
Conventional mode: You can answer a group call without any operation.
Trunking mode:
FOACSU
When receiving a FOACSU private call, the radio rings and vibrates. To answer the call, press the
PTT
key
within the preset time.
Off Air Call Set-Up (OACSU)
The call is established automatically.
6.1.3 Ending a Call
Conventional Mode
A call ends in either of the following cases:
The call hang time expires.
The calling party releases the
PTT
key.
Trunking Mode
A group/broadcast/all call ends when the calling party hangs up or presses the preprogrammed
Clear Down
key.
A private call ends when the calling or called party hangs up or presses the preprogrammed
Clear Down
key.
6.2 Call on Analog Channel
In conventional mode, you can initiate or receive a call on an analog channel with or without signaling.