eavesdropping.
Enabling the Encrypt Feature
Press the preprogrammed
Encrypt
key.
Setting the Encrypt Feature
To use the encryption services, the transmitting radio and the receiving radio must enable the Encrypt feature
simultaneously with matching encryption key. The
Encrypt
key is preprogrammed by your dealer.
7.17 Stun, Revive, and Kill
Conventional Mode
You can send the Radio Disable command to a private contact to disable its radio. The disabled radio is incapable of
any function except the remote monitor. The disabled radio must be reprogrammed by the dealer or enabled by the
Radio Enable command for reuse.
You can send the Radio Enable command to a private contact to restore its radio to normal use.
Trunking Mode
When the radio is stunned by the dispatch station or trunking system, the radio cannot initiate or receive any network
service (including calls), but retains features such as registration, revive, kill, and authentication. A stunned radio can
restore to normal use when receiving the revive command from the dispatch station or trunking system.
When the radio is killed by the dispatch station or trunking system, the radio is incapable of any function except power-
on/off. To restore normal use, send the radio back to the Company.
The Stun, Revive, and Kill features are preprogrammed by your dealer by default and triggered by the dispatch station
or trunking system.
7.18 Emergency Erase Data
The Emergency Erase Data feature allows the radio to erase encrypted data in case of emergency, so as to prevent
unauthorized access. When erasing the data, the radio stops voice and data services and returns to the home screen.
If this feature is preprogrammed by your dealer, the encrypted data can be erased in the following cases:
Press
SK1
and then the
PTT
key (within 1.5s) for two times, and then press
SK1
again.
When the radio is killed, the data in the radio will be erased automatically.
To Next Page
Loading...
Need help?
General
