Hytera H Series User Manual

User Manual
Supplementary Features
19

Fixed Trunking Station Control Channel (Fixed TSCC)
When the radio has unified frequency plans, it can use the Fixed TSCC.

Flexible Trunking Station Control Channel (Flexible TSCC).
When the radio does not have unified frequency plans, it can use the Flexible TSCC. After being powered on,
the radio automatically starts hunting.
Post-registration Hunt
After successful registration, you can press the preprogrammed
Manual Current Hunt
key to hunt again. To ensure
seamless communication, you can enable the following hunt modes:
Hunt Mode
Description
Operation
Background Hunt
This feature allows an idle radio to keep detecting the signal
strength of the BS with which it registers. If the signal strength
goes below the threshold level preset by the dealer, the radio will
automatically hunt for an adjacent BS with stronger signal
strength and register with it.
Press the preprogrammed
Background Hunt,
HomeStation Hunt, or
Multi-site Handover key.
Home Station Hunt
In a BS overlapping area, this feature allows the radio operating
on another channel to switch back to the home station channel
when its signal strength reaches the preset threshold. It is
recommended that you set your frequently used channel as the
home station channel.
Handover
The signal strength received from a BS may fluctuate due to
position change and affect the communication quality of the
radio. On such occasions, this feature allows the radio to
automatically register with the BS with stronger signal.
Vote Now
This feature allows the radio in idle to check the signal strength
of the BS assigned in a broadcast call, and decide whether to
register with the BS.
This feature is enabled by
default.

Hytera H Series Specifications

General

Brand	Hytera
Model	H Series
Category	Portable Radio
Language	English