7
group call contact, and all call contact information
such as call alias, call type and call ID.
●
Go to the “Menu -> Contact -> Contact List” menu
to access the contact list.
●
Press the programmed Contact List key to access
the contact list.
In the “Contact List” menu, you can view, edit or delete
the private contact. You can send to a private call
contact the following commands: Alert Call, Radio
Check, Remote Monitor, Radio Enable or Radio
Disable. Please refer to the Feature Description and
Operation Manual along with the product for details.
Favorite Contact
Favorite Contact is used to save the frequently used
contacts.
●
Go to the “Menu -> Contact -> Favorite Contact”
menu to access the favorite contact list.
●
Press the programmed Favorite Contact List key
to access the favorite contact list.
In the favorite contact list, you can view, edit or delete
the favorite contacts. You can send to a favorite
contact the following commands: Alert Call, Radio
Check, Remote Monitor, Radio Enable or Radio
Disable. Please refer to the Feature Description and
Operation Manual along with the product for details.
New Contact
New Contact is used to add a new contact to the
contact list.
Go to the “Menu -> Contact -> New Contact” menu
to access the relevant screen. Input the number and
alias of a new contact and save it to the private contact
list.
Note:
●
The number and alias of a new contact
must be unique.
●
You can also save the numbers from the
Call Logs into the contact list.
Call Services
After the radio is powered on, you can make and
receive calls. To ensure optimal volume of the
receiving radio, keep the microphone about 2.5 to 5
centimeters away from your mouth when transmitting.
Private Call
Initiating a Private Call
When initiating a private call, the radio will display the
icon
. You can make a private call through the
following ways:
Preset Contact
You may request your dealer to preset a regular
private call contact for each digital channel.
In the home screen, hold down the PTT key to initiate
a private call to the private contact preset for the
current channel.
Contact List
2
.
5
~
5
.
0C
M
1. Go to “Menu -> Contact -> Contact List”.
2. Use the Up/Down key to select an appropriate
contact.
3. Hold down the PTT key to initiate a private call.
Call Logs
1. Go to “Menu -> Call Logs -> Outgoing/Incoming/
Missed”.
2. Use the Up/Down key to select an appropriate
contact.
3. Hold down the PTT key to initiate a private call.
Manual Dial
1. Go to “Menu -> Contact -> Manual Dial”.
2. Input the private call number using the numeric
keypad.
3. Hold down the PTT key to initiate a private call.
Note:
●
If both the Private Call Manual Dial and
Group Call Manual Dial are available, you
can press
to switch between the
two dialing methods, and the radio will
display the call type (Private ID/ Group
ID).
●
If the Default Numeric Key Selection
feature is enabled by your dealer, you
can enter a private call number in the
home screen, and then hold down the
PTT key to initiate a private call. However,
if the DTMF keypad is enabled, the
number entered in the home scr
een is a
phone number. You can dial the private
call number through the “Manual Dial”
menu only.
Receiving and Responding to a Private Call
When you receive a private call, the radio will display
the icon
, then you can listen without any
operation.