8
ReDial Call Logs
1. In the home screen, press to enter the
ReDial Call Logs.
2. Use the Up/Down key to select an appropriate
contact.
3. Press or hold down the PTT key to initiate
BackDial Call Logs
1. In the home screen, press
to enter the
ReDial Call Logs.
2. Use the Up/Down key to select an appropriate
contact.
3. Press or hold down the PTT key to initiate
a group call.
Manual Dial
1. In the home screen, input a group call number
using the keypad.
For the dial rules, please refer to “Dial Scheme”
in the Feature Description and Operation Manual
along with the product.
2. Press , or hold down the PTT key to
initiate a group call.
Missed Call Screen
Hold down the PTT key in the “Missed Call” screen to
directly call back the last missed private contact. Also
you can press or hold down the PTT key to call
back when viewing that private contact.
Receiving a Private Call
● FOACSU
When you receive a private call, the radio will
display the icon on the LCD. You can press
or hold down the PTT key within the preset
time period to answer the call. After the call is
established successfully, the radio will emit a tone
and display the icon
on the LCD as well. If
you don’t answer this call, the radio will display the
icon to remind you.
● OACSU
The call is established automatically. The radio will
display the icon on the LCD after call setup.
Voice Communication
After a private call is established, either the calling party
or called party can hold down the PTT key to talk while
the radio displays “PTT Enable” on the LCD. The radio
will display the icon when transmitting and the
icon when receiving.
Ending a Private Call
The call will be terminated when any of the following
situations occurs:
● Neither party holds down the PTT key to speak
before the preset time period expires.
● The call duration exceeds the time preset by the
dealer.
● Either of the parties ends the ongoing call.
● The base station signal is lost.
● Either of the parties selects an empty group via
the Group Call Selector Knob during the call.
● A pre-emptive call or an emergency call occupies
the channel.
Group Call
The Group Call includes group call and broadcast call.
In a group call, both the calling party and the called
party can talk. However, in a broadcast call, only the
calling party can talk while the called party can listen to
it only. The radio cannot make a broadcast call unless
the dealer authorizes it.
As a broadcast call is made in the same manner as a
group call, we will only detail their differences in the
following introductions.
Initiating a Group Call
When you initiate a group call, the radio will display the
icon . You can make a group call through any of
the following ways. The operation is similar to initiating a
private call.
Preset Contact
In the home screen, you can hold down the PTT key to
initiate a group call to the contact currently selected by
the Group Call Selector Knob.
Group Contact
1. In the home screen, enter the menu “Subgroup” by
pressing the Menu or Subgroup key.
2. Go to “Subgroup -> Members”.
3. Use the Up/Down key to select an appropriate
contact.
4. Press
or hold down the PTT key to initiate
a group call.
Note: To make a broadcast call, select
“Broadcast Call” as the “Call Type”,
and press the OK key,
key or hold
down the PTT key.
ReDial Call Logs
1. In the home screen, press
to enter the
ReDial Call Logs.
2. Use the Up/Down key to select an appropriate
contact.
3. Press
or hold down the PTT key to initiate
a group call.
BackDial Call Logs
To Next Page
Loading...
Need help?
General
