11
Optional Accessories
The following items are the main optional accessories
for the product, and please consult your local dealer
for more other accessories.
Caution: Use the accessories specified by
the Company only. If not, the Company shall
not be liable for any loss or damage arising
out of use of unauthorized accessories.
Type Model Name
Power Supply
CH10A06
Dual Pocket MCU
Charger Kit (for Li-ion/Ni-
MH Batteries)
MCA05
Battery Optimizing
System
MCA08
MCU Multi-unit Rapid-
rate Charger (for thick
battery)
POA38
Li-ion/Ni-MH Battery
Adapter
POA59
Multi-unit charger battery
adapter
Audio
Accessories
EBN10-Ex
Intrinsically Safe Bone
Conduction Headset
(IP57)
EBN11- Ex
Intrinsically Safe Bone
Conduction Headset
(IP57)
EBN12-Ex
Intrinsically Safe Bone
Conduction Headset
(IP57)
ECN20-Ex
Intrinsically Safe Noise-
cancelling Headset (IP57)
ECN21-Ex
Intrinsically Safe Noise-
cancelling Headset (IP57)
Audio
Accessories
ECN22-Ex
Intrinsically Safe Noise-
cancelling Headset (IP57)
EHN12-Ex
Ex earset with On-Mic
PTT
ELN09-Ex
Intrinsically Safe Throat-
vibrating Earpiece (IP57)
ELN10-Ex
Intrinsically Safe Throat-
vibrating Earpiece (IP57)
ELN11- Ex
Intrinsically Safe Throat-
vibrating Earpiece (IP57)
SM18N4-
Ex
Intrinsically Safe Remote
Speaker Microphone
(IP57)
SM24N1-
Ex
Ex Multi-functional
Remote Speaker
Microphone (IP57)
SM24N2-
Ex
Ex Multi-functional
Remote Speaker
Microphone (IP57)
POA63-Ex Ex Large PTT (IP57)
Cable PC38
Programming Cable (USB
port)
Carrying
Accessories
LCY005
Carrying Case with
Leather (swivel)
Care and Cleaning
To guarantee optimal performance as well as a long
service life of the product, please follow the tips below.
Product Care
●
Do not pierce or scrape the product.
●
Keep the product far away from corrosive
environments.
●
Do not hold the product by its antenna or earpiece
cable directly.
●
Attach the accessory connector cover when the
accessory is not in use.
Product Cleaning
Caution: Turn off the product and remove
the battery before cleaning.
●
Clean up the dust and ne particles on the product
surface and charging piece with a clean and dry lint-
free cloth or a brush regularly.
●
Use neutral cleanser and a non-woven fabric to
clean the keys, control knobs and front case after
long-time use. Do not use chemical preparations
such as stain removers, alcohol, sprays or oil
preparations, so as to avoid surface case damage.
●
Make sure the product is completely dry before use.
To Next Page
Loading...
Need help?
General
