21
shortcut in the control center.
USB Tethering
Before using the USB tethering, make sure that the driver is installed on the computer or the
network connection is established.
To configure the USB Tethering, do as follows:
1.
Connect the terminal to the computer with a USB cable.
2.
Tap Network & Internet > Hotspot & tethering > USB tethering, and then enable the USB
tethering.
BT Tethering
Before using the BT tethering, the terminal and the BT device must be connected and paired. For
details, see Connecting to BT Device in 3.8.1 BT.
To configure the BT tethering, do as follows:
3.
Tap Network & Internet > Hotspot & tethering > Bluetooth tethering, and then enable the BT
tethering.
4.
Return to the Settings interface, and tap Connected devices > Bluetooth
.
5.
In the Bluetooth interface, tap next to the paired device, select Internet Access, and then
tap OK.
3.1.4 VPN
VPN (Virtual Private Network) is a secured temporary network established on the public internet. It can
encrypt transmitted data, and achieve information security of the private network.
To configure the VPN, do as follows:
To Next Page
Loading...
Need help?
General
