31
To manually enable Battery Saver, turn on the switch.
To enable automatic Battery Saver, tap Turn on automatically, and then select the condition to
trigger battery saver.
Battery Saver is disabled when the terminal is being charged.
Remaining Power Display
To display the remaining power in the status bar, turn on the Battery percentage switch.
3.9.2 Storage
Storage allows you to view the proportion of used storage, and release space for better use.
To extend the storage, you can install a Micro SD card.
To release the storage, tap Settings > Storage, and then do one of the following:
Manual Release
Tap FREE UP SPACE, and then remove the latest cached data such as pictures, videos, and app
data.
To Next Page
Loading...
