60
9. System Upgrade
Use the official software only to upgrade the system, to prevent equipment failure, data loss, or
damage to the system security.
Be sure to back up your data before upgrade.
Ensure that the battery power is more than 30% before upgrading.
The terminal prompts in the status bar when the latest software version becomes available.
To upgrade the terminal, do as follows:
1.
Connect to the network and tap in the status bar
.
2. Tap CHECK UPDATE to detect the new version.
3. Download and install the latest upgrade package.
When upgrade is completed, the terminal will automatically restart.
To configure the upgrade, do as follows:
1.
In the System upgrade interface, tap SETTINGS
.
2.
Set the upgrade.
Auto check for update: The terminal automatically checks the latest package on a daily basis when
the cellular data network is connected.
Wifi auto download: The terminal automatically checks and downloads the upgrade package when
Wi-Fi is connected.
To Next Page
Loading...
