Reaction Arm and Socket Installation
• Choose the correct reaction arm for the job. The Digital jGun is shipped with a standard length
reaction arm, but your gun may have been ordered with custom-length reaction arm for a
specic purpose.
• If using the HYTORC Washer™, follow installation instructions in HYTORC Washer™
Overview.
• Clean the reaction arm and Digital jGun barrel mating surfaces before installing the
reaction arm.
• Slide the reaction arm onto the Digital jGun barrel with the reaction arm extension facing
out.
Installing a Reaction Arm
!! CAUTION !!
ALWAYS INSTALL THE REACTION ARM WITH THE EXTENSION
FACING AWAY FROM THE GUN.
FAILURE TO INSTALL THE REACTION ARM CORRECTLY COULD
RESULT IN THE REACTION ARM COMING IN CONTACT WITH YOUR
HAND OR OTHER ANOTHER PART OF YOUR BODY, CAUSING
PERSONAL INJURY.
13
BREAKTHROUGH PRODUCTS FOR INDUSTRIAL BOLTING
To Next Page
Loading...
Need help?
General
