Hytorc Digital jGun Series User Manual

This manual applies to all tool part numbers in the Digital jGun Single Speed Product
Family. It is recommended the manual is kept up-to-date by checking the edion and
date code at the boom of this page by ulizing the Torque Gun Company website and
downloading a copy of the most recent edion as needed.
TORQUE GUN LLC
A HYTORC COMPANY
333 Route 17 North,
Mahwah, New Jersey 07430 U.S.A.
Noce: The informaon contained in this document is subject to change without noce. The Torque
Gun Company makes no warranty of any kind with regard to this material, including but not limited
to, the implied warranes of merchantability and tness for a parcular purpose. The Torque Gun
Company shall not be liable for errors contained herein or for incidental or consequenal damages in
connecon with the furnishing, performance, or use of this material. It is further recommended that the
end-user or repair technician insure they have obtained and are familiar with the latest revision of the
manual for the equipment outlined in this document.
Restricted Rights Legend: Use and duplicaon of the informaon contained within this manual is
limited to the purchaser, end user, or licensed Torque Gun Company representave. It is recommended
that proper training for the equipment outlined in this manual be conducted by a Torque Gun Company
authorized training representave for any person who is operang or repairing the equipment outlined
in this document. Modicaon, or disclosure by any other agency or representave is strictly forbidden.
Product Modicaons: Torque Gun DOES NOT ALLOW any of the products listed in this manual to be
modied by any end user without excepon. Should an applicaon require a modicaon to the tool, or
any of the standard accessories please consult with your local Torque Gun Company representave and
they will be able to obtain the assistance for any modicaon that may be required.
© Torque Gun 2017: All Rights Reserved. Reproducon, adaptaon, or translaon without prior writ-
ten permission is prohibited, except as allowed under the copyright laws.
5th Edion. Printed in USA. December 2017
Complies with standards publicaon BS EN 82079-1:2012
DIGITAL jGun PRODUCT FAMILY:
DJ-.25, DJ-.5, DJ-1, DJ-2, DJ-3, DJ-5, DJ-8
EN, EN-ISO, ISO Standards:
For a complete EC declaraon of conformity
or if you require any further assistance please
contact your local Torque Gun representave
or 1-888-GUN-2-GUN (1-888-486-2486) or on
the web at www.torquegun.com.
EN ISO 4414:2010
EN 61310-2:2008
EN 61310-3:2008
ISO 3744:2011
EN ISO 12100-1:2011
EN ISO 12100-2:2011
EN ISO 14121-1:2007
EN ISO 11148-6:2012

Hytorc Digital jGun Series Specifications

General

Brand	Hytorc
Model	Digital jGun Series
Category	Power Tool
Language	English