Hytorc Stealth 2 - Accessories; Safety Handle; Boltsafe Load Tester; Torque and Angle Sensor

3.6 Accessories
3.6.1 Safety handle
Procedure
For more convenience and safety,
install the safety handle to the tool
or the reaction arm.
3.6.2 BoltSafe load tester
The BoltSafe load tester has a reading system and one or more sensors. The sensors
monitor the bolt load in bolted joints. The sensors are shaped and used as a regular
washer. Different BoltSafe read-out systems are available for continuous and periodic
measurement.
Procedure
Place the BoltSafe load tester
between the nut and mounting
surface.
3.6.3 Torque and angle sensor
The tool can be extended with a torque and angle sensor for digital registration of bolting.
Description
16 37 - 001 -