To Next Page

To Previous Page

N700 Operating Instructions and Parts Manual 6. Explanation of F-Group Function

6.15 Motor rated current setting (F017/F217)

Setting the rated current value of the motor.

Code Function name Initial value Unit Setting range Contents

F017 Motor rated current setting Irate A 0.0~999.9 Units : 0.1 A

F217

Motor rated current setting,

2nd motor

Irate A 0.0~999.9 Units : 0.1 A

Table 6- 15 Motor rated current setting (F017/F217)

Note) The motor rated current of F017 is set to the setting value at factory automatically.

Note) Motor rated current is set automatically when changing motor capacity.

6.16 Speed/Torque mode selection (F018)

Code Function name Initial value Unit Setting range Contents

0 : Speed control mode

F018

Speed/Torque mode

selection

0 - 0~1

1 : Torque control mode

Table 6- 16 Speed/Torque mode selection (F018)

Please, use a feedback option card for using this function.

Set the F012 to 6 or 7.

Note) This function is explained in the feedback option card manual.

6.17 SLV control mode selection (F019)

Code Function name Initial value Unit Setting range Contents

0 : Normal Operation

F019

SLV control mode

selection

0 - 0~1

1 : 0Hz Operation

Table 6- 17 SLV control mode selection (F019)

(1) Below 2Hz(When F012 is set to 4), the speed sensorless control can make a high torque with

0Hz operation mode

(2) Set the start frequency to 0.1Hz(F004=0.1)

(3) An electrical acoustic noise can be produced in 0Hz operation mode

(4) In the case of using this function, please set surely the suitable motor constant of using the

motor according to the parameter of “selection of motor constant [H**]”

Hyundai n 700 User Manual

Questions and Answers: