IAI RCON-PC User Manual

P Driver Unit
Gateway Unit
Terminal Unit
SCON
Extension
Unit
Fan Unit
A Driver Unit
D Driver Unit
Simple Absolute Unit
for A Driver Unit
Simple Absolute Unit
for P Driver Unit
Serial Numbe
r
Model
Model Plate (Large)
Refer to “External Dimensions”
for the attached position.
Serial Numbe
r
Model
Model Plate (Large)
Refer to “External Dimensions”
for the attached position.
Serial Numbe
r
Model
Model Plate (Large)
Refer to “External Dimensions”
for the attached position.
-PC/PCF/AC/DC, -FU
-ABU-A/P, -EXT
24V Driver Unit, Fan Unit,
Simple Absolute Unit, SCON Extension Unit
First Step Guide Second Edition
Thank you for purchasing our product.
Make sure to read the Safety Guide and detailed Instruction Manual (DVD) included with the product
in addition to this First Step Guide to ensure correct use.
This Instruction Manual is original.
• Using or copying all or part of this Instruction Manual without permission is prohibited.
• The company names, names of products and trademarks of each company shown in the sentences
are registered trademarks.
R-unit is constructed with Gateway Unit (RCON-GW/GWG, RSEL-G), Terminal Unit (RCON-GW-TR), 24V
Driver Unit (RCON- PC/PCF/AC/DC), Simple Absolute Unit (RCON-ABU), 200V Power Supply Unit
(RCON-PS2-3), 200V Driver Unit (RCON-SC), Fan Unit (RCON-FU/FUH), PIO Unit (RCON-NP/PN),
PIO/SIO/SCON Extension Unit (RCON-EXT-NP/PN), SCON Extension Unit (RCON-EXT) and SCON
Controller (SCON-CB-*-RC) to connect to the SCON Extension Unit.
In this guide, describes about the 24V Driver Unit, Simple Absolute Unit, Fan Unit and SCON Extension Unit.
For instruction of other units, refer to the first step guide and instruction manual (DVD) of each unit.
This product is comprised of the following parts if it is of standard configuration.
If you find any fault in the contained model or any missing parts, contact us or our distributor.
1. Parts
(1) 24V Driver Unit (RCON-PC/PCF/AC/DC)
No. Part Name Model Numbe
r
Remarks
1 RCON P Driver Unit
Refer to “How to read the model
plate”, “How to read the model code”
-
Two-Axis Type/One-Axis Type
/High-Thrust Type
2 RCON A Driver Unit
Refer to “How to read the model
plate”, “How to read the model code”
- Two-Axis Type / One-Axis
3 RCON D Driver Unit
Refer to “How to read the model
plate”, “How to read the model code”
- Two-Axis Type / One-Axis
Accessories
4
D
r
ive Source Cutoff
Connecto
r
DFMC1.5/2-STF-3.5
(Manufactured by PHOENIX CONTACT)
1
Recommended Cable Size
0.5 to 1.25mm
2
(AWG20 to 16)
5 First Step Guide ME0383 1 This Manual
6 Safety Guide M0194 1
(2) Fan Unit (RCON-FU)
No. Part Name Model Numbe
r
Rema
r
ks
1 Fan Unit RCON-FU - When ordered individually
(3) Simple Absolute Unit (RCON-ABU-P/A)
No. Part Name Model Numbe
r
Remarks
1 Simple Absolute Unit
Refer to “How to read the model
plate”, “How to read the model code”
- P Driver Type/A Driver Type
Accessories
2 Simple Absolute Battery AB-7 1
3 Moto
r
/encoder Cable CB-ADPC-MPA005 1
4 Fi
r
st Step Guide ME0383 1 This Manual
5 Safety Guide M0194 1
(4) SCON Extension Unit (RCON-EXT)
No. Part Name Model Numbe
r
Remarks
1 SCON Extension Unit
Refer to “How to read the model
plate”, “How to read the model code”
-
Accessories
2 Terminal Connecto
r
RCON-EX
T
-TR 1 Terminal Resistance
3 First Step Guide ME0383 1 This Manual
4 Safety Guide M0194 1
2. Teaching Tool (Please purchase separately)
A teaching tool such as PC software is necessary when performing the setup for position setting, parameter
setting, etc. that can only be done on the teaching tool. Please prepare either of the following teaching tools.
No. Part Name Model
1 PC Software
(
Includes USB Exchan
g
e Ada
p
ter + USB Cable + Peri
p
heral Communication Cable
)
RCM-101-USB
2 Touch Panel
T
eachin
g
Pendant TB-02
(
Standard
/
Dead Man’s Switch Mounted
)
TB-02/TB-02D
3 Touch Panel Teachin
g
Pendant TB-03 TB-03
3. Instruction manuals related to this product, which are contained in the instruction manual (DVD).
No. Name Manual No.
1 RCON S
y
stem Inst
r
uction Manual ME0384
2 SCON-CB/CGB/LC/LCG Controller Instruction Manual ME0340
3 PC Software RCM-101-MW/RCM-101-USB Instruction Manual ME0155
4 Touch Panel Teachin
g
Pendant TB-02 A
pp
licable for Position Controller Instruction Manual ME0355
5 Touch Panel Teachin
g
Pendant TB-03 Wired Link A
pp
licable for Position Controlle
r
Instruction Manual ME0376
4. How to read the model plate
(1) 24V Driver Unit
(2) Fan Unit
(3) Simple Absolute Unit
(4) SCON Extension Unit
Mark Explanation of Mark
Use IAI specified cables only.
Do not touch product when power is ON. Risk of burn.
5. How to read the model code
(1) 24V Driver Unit
(2) Fan Unit (When ordered individually)
(3) Simple Absolute Unit
(4) SCON Extension Unit
1. Specifications of Power Supply
Item Specification
Power Input Voltage Range 24V DC ±10%
Supply Current Described in “Current Amperage”
Power Source Frequency Range -
Current Amperage Described in “Current Amperage”
In-Rush Current Described in “Current Amperage”
Instantaneous Power Outage Endurance By 24V power supply
Protection Function against Electric Shock Class Ⅲ
2. Specifications of Control Part
Item Specification
Number of Controlled Axes RCON System 1 to 16 axes, RSEL System 1 to 8 axes
Data Memory System
Position data and parameters are saved in the nonvolatile memory.
(There is no limitation in number of writing)
SIO Interface (T. P. Connector) Communication System: RS485, Baud Rate: 9.6/19.2/38.4/57.6/115.2/230.4kbps
SIO Interface (USB Connector) Communication System: USB, Baud Rate: 12Mbps
PIO Interface None
Conformed Extension I/O Interface
(Field Network Interface)
CC-Link, CC-Link IE Field, DeviceNet, EtherCAT, EtherNet /IP, PROFIBUS-DP and
PROFINET IO
Pulse Train Type Unavailable to Control
Brake Output Voltage 24V DC ±10%
Connectable Brake Power Supply 11W Max.
Calendar Feature Maintained Duration: Approx. 10 days, Charge Time: Approx. 100 hours
Applied Safety Category B (Safety category applicable type is capable to achieve 4 with external circuit)
Driver Source Cutoff System Drive source cutoff with semiconductor (Power MOSFET)
Stop Input Break Contact Input
Stop Action Turning servo OFF + Drive source cutoff
Enable Input None
T. P. Enable Input Available
Enable Action Turning servo OFF
Protective functions Overcurrent, temperature error, encoder line breakage and overload
Preventive / Predictive Maintenance Feature Electrolytic capacitor capacity dropdown and Fan revolution dropdown
LED Display Described in “Troubleshooting”
Brake Compulsory Release Feature Brake release switch equipped on driver unit
Jog Jog switch equipped on driver unit
Oversea Certifications CE Marking, UL Standard
3. Environmental Specifications
Item Specification
Environment
Environment of Use Pollution Degree 2
Surrounding Air Temperature With Fan Unit: 0 to 55 ° C, With No Fan Unit: 0 to 40 ° C, Simple Absolute Unit: 0 to 40 ° C
Surrounding Humidity 85% RH or less (non-condensing)
Peripheral Ambience of Use [Refer to section in Installation Environment]
Surrounding Storage Temperature -20 to 70°C
Vibration Endurance
Frequency 10 to 57Hz/Swing width: 0.075mm
Frequency 57 to 150Hz/Acceleration: 9.8m/s
2
XYZ Each direction Sweep time: 10min. Number of sweep: 10times
Protection Class IP20
Altitude 1000m
Cooling Method Natural air-cooling and Forced air cooling with fan unit
Dielectric Withstanding Voltage Between power supply terminal and FG 500V DC 10M
Ω
or more
Product Check
Basic Specifications
Warning: Operation of this equipment requires detailed installation and operation instructions
which are provided on the DVD Manual included in the box this device was packaged
in. It should be retained with this device at all times.
A copy of the DVD Manual can be requested by contacting your nearest IAI Sales
Office listed at the back cover of the Instruction Manual or on the First Step Guide.
<Type>
A
C : A Driver Unit
DC : D Driver Unit
PC : P Driver Unit
PCF : P Driver Unit (High-Thrust Type)
RCON - PCF - 1
< Number of Axes >
1: One-Axis Type
2: Two-Axis Type
Note There should be only one-axis type for
P Driver Unit (high-thrust type)
<Series>
<Type>
A
BU: Simple Absolute Unit
RCON - ABU - A
< Applicable Driver >
A
: For A Driver Unit
P: For P Driver Unit
<Series>
2A
<Type>
EXT : SCON Extension Uni
t
RCON - EXT
<Series>
<Series>
<Type>
FU: Fan Unit
RCON - FU
Note Fan unit can be ordered with a model code for a gateway unit as an accessory of the gateway unit.
Color P Driver P Driver (high thrust) A Driver D Driver
Label
Green Green (Light) Blue Brown
Serial
Number
Model
Model Plate (small)
It is attached on the
bottom of the panel
front face.
Serial Number
Model
Model Plate (small)
Serial
Number
Model Code
(Partially)
It is attached on the
bottom of the panel
front face.
Model Plate (small)
It is attached on the
bottom of the panel
front face.
Serial
Number
Model Code
(Partially)

IAI RCON-PC Specifications

General

Brand	IAI
Model	RCON-PC
Category	Controller
Language	English