IAR SYSTEMS I-jet - Technical Specifications

AFE1_AFE2-1:1
I-jet
13
Technical specifications
Reference information about:
● The I-jet package, page 13
● Model specifications, page 13
● JTAG timing specification, page 14
● Hardware revision history, page 15
● Target interface, page 16
● Indicators, page 20
● Adapters, page 21
THE I-JET PACKAGE
The I-jet package contains:
● The I-jet in-circuit debugging probe
● MIPI-20 JTAG cable
● MIPI-10 JTAG cable
● USB 2.0 Micro B cable
● ADA-MIPI20-ARM20 adapter
● Welcome letter
MODEL SPECIFICATIONS
These are the specifications of I-jet:
USB speed 480 Mbps (USB 2.0)
USB connection Micro-B
Target connection MIPI-20, MIPI-10
Adapters included ADA-MIPI20-ARM20
I-jet debug interface JTAG and SWD
JTAG/SWD maximum clock 32 MHz
SWO protocols supported Manchester and UART
SWO maximum speed 60 Mbps
Power supplied to target 420 mA max at 4.4 V-5 V
Over-current protection ~520 mA