IAR SYSTEMS I-jet - Technical Specifications

AFE1_AFE2-1:1
42
Technical specifications
IAR Debug Probes User Guide
I-jet®, I-jet Trace, and I-scope™
Technical specifications
Reference information about:
● The I-jet Trace package, page 42
● Model specifications, page 42
● Hardware revision history, page 44
● Connectors, page 45
● Indicators, page 47
● Adapters, page 48
● Designing target boards for ETM trace, page 52
● General PCB layout guidelines, page 53
THE I-JET TRACE PACKAGE
The I-jet Trace package contains:
● The I-jet Trace in-circuit debugging probe
● MIPI-20 JTAG cable
● MIPI-10 JTAG cable
● USB3 A to micro-B cable
● ADA-MIPI20-ARM20 adapter
● Welcome letter
The I-jet Trace A/R/M package also contains:
● Mictor-38 adapter board attached to two 60-wire flat cables
MODEL SPECIFICATIONS
These are the specifications of I-jet Trace:
USB speed 4.8 Gbps (USB 3 SuperSpeed)
480 Mbps (USB 2.0 Hi-Speed)
USB connection USB 3 Micro-B (USB 2.0 Micro-B-compatible)