IAR SYSTEMS I-jet - Page 43

AFE1_AFE2-1:1
I-jet Trace
43
Target connection MIPI-20 (ETM, JTAG, cJTAG, SWO, and SWD)
MIPI-10 (JTAG and SWD)
Arm-20 (JTAG and SWD)
Mictor-38 (I-jet Trace A/R/M only) (ETM, JTAG,
cJTAG, SWO, and SWD)
External DC power input 5 V DC, 2 A, 0.05 in x 0.14 in (1.3 mm× 3.5 mm)
(Not supplied with I-jet Trace CM)
Adapters included ADA-MIPI20-ARM20
Debug interface ETM, JTAG, cJTAG, SWO, and SWD
JTAG/SWD/cJTAG maximum
clock
100 MHz
JTAG/SWD clock rise & fall time <= 2 ns
ETM maximum trace clock I-jet Trace CM: 150 MHz
SWO protocols supported Manchester and UART
SWO sampling frequency 200 MHz
SWO maximum bandwidth 60 Mbps
ETM trace memory size I-jet Trace CM: up to 256 Mbytes
I-jet Trace A/R/M: up to 1 Gbyte
Power supplied to target
(4.1 V-4.6 V)
400 mA max with USB 3 ports
200 mA with USB 2 ports
400 mA with ExternalDC power
600 mA (I-jet Trace A/R/M only)
Over-current protection ~420 mA with USB 3
~220 mA with USB2
~620 mA with ExternalDC power (5 V at 2 A)
Target power measurement
resolution
~160 uA
Target power measurement
speed
up to 200 ksps (kilo samples per second)