ibis SiViB Record 1500 User Manual

IBIS GmbH SiViB Record 1500 / Record Control Manual Page 10
IBIS Ingenieurbüro für Instandhaltungs- und Schwingungsmeß-Systeme GmbH
Reinheimer Str. 17, 64846 Groß-Zimmern, Germany; www.ibis-gmbh.de
Tel. +49 6071/42222, Fax +49 6071/71707, Email: info@ibis-gmbh.de
Software Installation
PC Requirements
Minimal configuration for PC
Pentium Processor or compatible
64 MB RAM
HD min. 20 MB free
CD-ROM or DVD drive for software installation
Min. 1 RS232 serial port
VGA graphics, resolution min. 800 x 600; 256 colors
Operating System
SiViB Record Control runs under Windows 98, XP, Vista, Win7
Installing the Software
Put the CD into your CD-ROM drive.
Click Start, Run
Type:
D:\English\setup (if your CD drive is not D:, use the corresponding drive letter instead).
Click OK.
The default path is C:\Record_Control. You can change the path according to your wishes, if required.
Kick “Finish” for starting the installation process.
Firstly the Record Control program and configuration files will be installed. Then the „LabView Runtime
Engine Setup“ will start automatically. The runtime engine is necessary for running Record Control.
Follow the dialogue screens for completing the process.

ibis SiViB Record 1500 Specifications

General

Brand	ibis
Model	SiViB Record 1500
Category	Controller
Language	English