IBIS
GmbH
SiViB
Record 1500 / Record Control Manual Page 48
IBIS
Ingenieurbüro für Instandhaltungs- und Schwingungsmeß-Systeme GmbH
Reinheimer Str. 17, 64846 Groß-Zimmern, Germany; www.ibis-gmbh.de
Tel. +49 6071/42222, Fax +49 6071/71707, Email: info@ibis-gmbh.de
Setting Update Rate and Time
The update rate and time for the next update is set in the systems settings tab online.
Please note that all changes have to get stored.
Mail on Alarm
Record Control Net can send alarm notifications by email. After each upload process the software
checkes for alarm conditions and creates a alarm message file. These file is sent to all mail addresses
set in the file \Dat\mailadresses.txt
You can open and modify this file using a word processor like Notepad. There is one line per mail
address and tabs between the colons.
Active
Adress Mailserver
(Proxy)
Sender adress Account sender Password sender
1 reciver@somewhere.co
m
smtpMailserver
Adresse
sender@elsewere.co
m
Account_name_send
er
Password_sender_accou
nt
There must be an active account for the sender. Otherwise the mailserver will not accept the mail.
Please ask your mail system admin for advice.
The colon active can be set to 0 for disabling mails to the address in this row temporarily.
To Next Page
Loading...
Need help?
General