Important: The enclosure must be grounded before applying power.
The plug on the power supply cord is used as the main disconnect device. Ensure that the socket outlets
are located near the equipment and are easily accessible.
CAUTION:
When powered by multiple AC sources, unplug all power supplies to ensure disconnection.
DANGER
Do not remove covers from the enclosure or any of the modules. There is a danger of electric shock
inside. Do not attempt to disassemble the rear sub-chassis from the enclosure. Return any damaged
components to your supplier for repair.
DANGER
Hazardous voltage, current, or energy levels are present inside any component that has this label
attached. Do not open any cover or barrier that contains this label. (L001)
DANGER
An electrical outlet that is not correctly wired could place hazardous voltage on the metal parts of
the system or the devices that attach to the system. It is the responsibility of the customer to ensure
that the outlet is correctly wired and grounded to prevent an electrical shock. (D004)
DANGER
Multiple power cords. The product might be equipped with multiple power cords. To remove all
hazardous voltages, disconnect all power cords. (L003)
6 Installation and User Guide - Model 084
To Next Page
Loading...
Need help?
General