v All the supplied plug-in modules must be in place for the air to flow correctly around the enclosure
and also to complete the internal circuitry. Each row of drive bays must be completely empty or
completely full.
v If the enclosure system is used with modules missing for more than a few minutes, the enclosure can
overheat, causing power failure and data loss. Such use may also invalidate the warranty.
v If you remove a drive module, replace it immediately. If it is faulty, replace it with a drive module of
the same type and capacity.
v Ensure that all disk drives are removed from the enclosure before attempting to manhandle or move
the rack installation.
v Do not abandon your backup routines.
24 Installation and User Guide - Model 084
To Next Page
Loading...
Need help?
General