EasyManuals Logo

IBM BladeCenter HS22V 7871 User Manual

IBM BladeCenter HS22V 7871
258 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #197 background imageLoading...
Page #197 background image
Light path diagnostics
Use this information as an overview of light path diagnostics.
Light path diagnostics is a system of LEDs on the control panel and on various
internal components of the blade server. When an error occurs, LEDs can be lit
throughout the blade server to help identify the source of the error.
After you remove the blade server, you can press and hold the light path
diagnostics switch for a maximum of 25 seconds to light the LEDs and locate the
failing component. The following components have this feature:
v Storage drives
v Light path diagnostics panel
v Microprocessors
v Memory modules (DIMMs)
Viewing the light path diagnostics LEDs
Use this information to locate and identify the light path diagnostics LEDs.
Before you work inside the blade server to view light path diagnostics LEDs, read
“Safety” on page v and “Installation guidelines” on page 49.
If an error occurs, view the light path diagnostics LEDs in the following order:
1. Look at the control panel on the front of the blade server (see “Blade server
controls and LEDs” on page 10).
v If the information LED is lit, it indicates that information about a suboptimal
condition in the blade server is available in the IMM log or in the
Advanced-Management-Module event log.
v If the blade-error LED is lit, it indicates that an error has occurred; view the
light path diagnostics panel and LEDs to isolate the failing component.
2. To view the light path diagnostics panel and LEDs, complete the following
steps:
a. Remove the blade server from the BladeCenter unit. See “Removing the
blade server from the BladeCenter unit” on page 52.
b. Place the blade server on a flat, static-protective surface.
c. Remove the cover from the blade server. See “Removing the blade server
cover” on page 55.
d. Press and hold the light path diagnostics switch to light the LEDs of the
failing components in the blade server. The LEDs will remain lit for as long
as you press the switch, to a maximum of 25 seconds.
Chapter 6. Diagnostics 181

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the IBM BladeCenter HS22V 7871 and is the answer not in the manual?

IBM BladeCenter HS22V 7871 Specifications

General IconGeneral
BrandIBM
ModelBladeCenter HS22V 7871
CategoryServer
LanguageEnglish

Related product manuals