IBM Elastic Storage System 5147-102 User Manual

--code 8+2P --block-size 4M --set-size
60% --da DA3 --nsd-usage dataOnly --storage-pool dataX
d. Create the new vdisk sets.
# mmvdisk vs create --vs all
e. Add the vdisk sets to the lesystem.
- add vdisk sets to the filesystem:
# mmvdisk fs add --fs <fsname> --vs <vsname1a, vsname1b>
- mmvdisk fs add --fs fs3500hyper --vs vs_fs3500hyper_1A,vs_fs3500hyper_1B
f. Recommendation: Restripe the lesystem as needed.
# mmrestripefs <fsname> -b
# mmrestripefs fs3500hyper -b
Adding up to four 5147-102 storage enclosures to an existing ESS 3500
capacity conguration
This MES procedure involves adding up to four IBM Elastic Storage System 5147-102 Storage Enclosures
to an existing capacity conguration using single and dual SAS adapter pairs.
Adding up to two 5147-102 storage enclosures using single SAS adapter pair
The capacity conguration consists of one 5141-FN2 server enclosure and one or more 5147-102 storage
enclosures with enterprise HDDs for data storage. This conguration requires four 3.8TB NVMe drives
installed in the 5141-FN2 server enclosure for Log Tip as part of the system management requirements.
The four 3.8TB NVMe drives for Log Tip are not available for user data storage and are located in drive slot
1, 2, 13, and 14.
Chapter 1. Servicing (customer task)
19

IBM Elastic Storage System 5147-102 Specifications

General

Brand	IBM
Model	Elastic Storage System 5147-102
Category	Enclosure
Language	English