vs_fs3500hyper_1B, vs_fs3500hyper_2B
vdisk set map memory per server
node class available required required per vdisk set
--------------------------------------------- --------- -------- ----------------------
ess3500_mmvdisk_ess3500rw6a_hs_ess3500rw6b_hs 238 GiB 22 GiB vs_fs3500hyper_1A
(1513 MiB), vs_fs3500hyper_1B (1513 MiB), vs_fs3500hyper_2A (3091 MiB),
vs_fs3500hyper_2B
(3091 MiB), vs_fs3500hyper_ess3500rw6a_hs_ess3500rw6b_hs (8620 MiB)
e. Create the new vdisk sets.
# mmvdisk vs create --vs all
f. Add the vdisk sets to the lesystem.
# mmvdisk fs add --fs <fsname> --vs <vsname1a, vsname1b>
# mmvdisk fs add --fs <filesystem> --vs <vdisk set 1>,<vdisk set 2>
g. Recommendation: Restripe the lesystem as needed.
# mmrestripefs <fsname> -b
# mmrestripefs fs3500hyper -b
Adding up to four 5147-102 storage enclosures using dual SAS adapter pairs
The capacity conguration consists of one 5141-FN2 server enclosure and up to four 5147-102 storage
enclosures with enterprise HDDs for data storage. This conguration requires four 3.8TB NVMe drives
installed in the 5141-FN2 server enclosure for Log Tip as part of the system management requirements.
The four 3.8TB NVMe drives for Log Tip are not available for user data storage and are located in drive slot
1, 2, 13, and 14.
Chapter 1. Servicing (customer task)
23
To Next Page
Loading...
Need help?
General
