Chapter 1. General description 13
EPMA One processor activation for processor FC EPM0:
Each occurrence of this feature permanently activates one processor
on Processor Card FC EPM0. One processor activation for processor
feature FC EPM0 with inactive processors.
AIX
IBM i
Linux
EPMW Processor CoD utility billing for FC EPM0, 100 processor-minutes:
Provides payment for temporary use of processor feature FC EPM0
with supported AIX or Linux operating systems. Each occurrence of this
feature will pay for 100 minutes of usage. The purchase of this feature
occurs after the customer has 100 minutes of use on processor cores
in the shared processor pool that are not permanently active.
AIX
Linux
EPMX Processor CoD utility billing for FC EPM0, 100 processor-minutes:
Provides payment for temporary use of processor feature FC EPM0
with supported IBM i operating systems. Each occurrence of this
feature will pay for 100 minutes of usage. The purchase of this feature
occurs after the customer has 100 minutes of use on processor cores
in the shared processor pool that are not permanently active.
IBM i
EPME One processor-day on/off billing for FC EPM0:
After an On/Off Processor Enablement feature is ordered and the
associated enablement code is entered into the system, you must
report your on/off usage to IBM at least monthly. This information, used
to compute your billing data, is then provided to your sales channel.
The sales channel will place an order for a quantity of On/Off Processor
Core Day Billing features and bill you. One FC EPME must be ordered
for each billable processor core day of feature FC EPM0 used by a
supported AIX or Linux operating system.
AIX
Linux
EPMF One processor-day on/off billing for FC EPM0:
After an On/Off Processor Enablement feature is ordered and the
associated enablement code is entered into the system, you must
report your on/off usage to IBM at least monthly. This information, used
to compute your billing data, is then provided to your sales channel.
The sales channel will place an order for a quantity of On/Off Processor
Core Day Billing features and the client will be charged. One FC EPMF
must be ordered for each billable processor core day of feature FC
EPM0 used by a supported IBM i operating system.
IBM i
EPMN On/off processor CoD billing, 100 processor-days, for FC EPM0 AIX
Linux
EPMP On/off processor CoD billing, 100 processor-days, for FC EPM0 IBM i
EP9T 90-day temporary on/off processor enablement AIX
IBM i
Linux
EPM1 0 to 16-core 3.8 GHz POWER7+ processor card:
16-core 3.8 GHz POWER7+ CUoD processor planar containing two
8-core processors. Each processor has 2 MB of L2 cache (256 KB per
core) and 32 MB of L3 cache (4 MB per core). There are 16 DDR3
DIMM slots on the processor planar (8 DIMM slots per processor),
which can be used as capacity on demand (CoD) memory without
activating the processors. The voltage regulators are included in this
feature code.
AIX
IBM i
Linux
Feature
code
Description OS
support
To Next Page
Loading...
Need help?
General