16 IBM Power 770 and 780 (9117-MMD, 9179-MHD) Technical Overview and Introduction
EP9T 90 day temporary on/off processor enablement AIX
IBM i
Linux
EPH2 0 to 32-core 3.72 GHz POWER7+ processor card:
32-core 3.72 GHz POWER7+ CUoD processor planar containing four
8-core processors. Each processor has 2 MB of L2 cache (256 KB per
core) and 80 MB of L3 cache (10 MB per core). There are 16 DDR3
DIMM slots on the processor planar (eight DIMM slots per processor),
which can be used as CoD memory without activating the processors.
The voltage regulators are included in this feature code.
AIX
IBM i
Linux
EPHC 1-core activation for processor feature FC EPH2:
Each occurrence of this feature will permanently activate one
processor core on Processor Card FC EPH2.
AIX
Linux
IBM i
EPHS 100 on/off processor days of CoD billing for processor FC EPH2:
After the On/off Processor function is enabled in a system, you must
report your on/off usage to IBM at least monthly. This information, used
to compute your billing data, is provided to your sales channel. The
sales channel will place an order on your behalf for the quantity of this
feature that matches your reported use. One FC EPHS provides 100
days of on/off processor billing for POWER7+ CoD Processor Book FC
EPH2 for AIX/Linux.
AIX
Linux
EPHT 100 on/off processor days of CoD billing for processor FC EPH2:
After the On/off Processor function is enabled in a system, you must
report your on/off usage to IBM at least monthly. This information, used
to compute your billing data, is provided to your sales channel. The
sales channel will place an order on your behalf for the quantity of this
feature that matches your reported use. One FC EP2P provides 100
days of on/off processor billing for POWER7+ CoD Processor Book FC
EPH2 for IBM i.
IBM i
EPHJ One processor day on/off billing for FC EPH2:
After an On/Off Processor Enablement feature is ordered and the
associated enablement code is entered into the system, you must
report your on/off usage to IBM at least monthly. This information, used
to compute your billing data, is then provided to your sales channel.
The sales channel will place an order for a quantity of On/ Off
Processor Core Day Billing features and the client will be charged. One
FC EP27 must be ordered for each billable processor core day of
feature FC EPH2 used by a supported AIX or Linux operating system.
AIX
Linux
EPHK One processor day on/off billing for FC EPH2:
After an On/Off Processor Enablement feature is ordered and the
associated enablement code is entered into the system, you must
report your on/off usage to IBM at least monthly. This information, used
to compute your billing data, is then provided to your sales channel.
The sales channel will place an order for a quantity of On/ Off
Processor Core Day Billing features and the client will be charged. One
FC EP29 must be ordered for each billable processor core day of
feature FC EPH2 used by a supported IBM i operating system.
IBM i
EPHY Processor CoD utility billing for FC EPH0, 100 processor-minutes AIX
Linux
EPHZ Processor CoD utility billing for FC EPH0, 100 processor-minutes IBM i
Feature
code
Description OS
support
To Next Page
Loading...
Need help?
General