IBM SurePOS 500 User Manual

SurePOS 500 4846-XX5 Technical Reference
Page 51 of 63
• SATA Only
Onboard Device
Select <Enter> to view the sub-menu.
Serial Port A I/O
Selects the I/O address used for Serial Port A. Using the default value is recommended. If modified, ensure the
selected I/O address does not conflict with other ports as values cannot be shared.
Default: 3F8h
Options:
• Disabled
• 2E0h
• 2E8h
• 2F8h
• 2D8h
• 3E8h
• 3F8h
Serial Port A IRQ
Selects the IRQ used for Serial Port A. Using the default value is recommended. If modified, ensure the selected IRQ
does not conflict with other ports as values cannot be shared.
Default: 4
Options:
• 3
• 4
• 5
• 6
• 7
• 11
Serial Port B I/O
Selects the I/O address used for Serial Port B. Using the default value is recommended. If modified, ensure the
selected I/O address does not conflict with other ports as values cannot be shared.
Default: 2F8h
Options:
• Disabled
• 2E0h
• 2E8h
• 2F8h
• 2D8h
• 3E8h
• 3F8h
Serial Port B IRQ
Selects the IRQ used for Serial Port B. Using the default value is recommended. If modified, ensure the selected IRQ
does not conflict with other ports as values cannot be shared.
Default: 3
Options:
• 3
• 4
• 5

IBM SurePOS 500 Specifications

General

Brand	IBM
Model	SurePOS 500
Category	Touch terminals
Language	English