SurePOS 500 4846-XX5 Technical Reference
Page 46 of 63
Shows the CD-ROM devices that will be booted if “CDROM” is selected as one of the First through Fourth Boot
Devices.
Select <Enter> to view the sub-menu and set the priority.
Quick Power On Self Test
If enabled, allows the system to skip certain tests while booting. This will decrease the time needed to boot the
system.
Default: Enabled
Options:
• Disabled
• Enabled
6.3.1 First Boot Device
The system will attempt to boot from the specified device category before trying other boot devices.
Default: USB-FDD (USB Floppy Drive)
Options:
• Hard Disk
• CDROM
• USB-FDD
• Network
• Disabled
Second Boot Device
The system will attempt to boot from the specified device category after trying the first boot device.
Default: Hard Disk (see Hard Disk Boot Priority)
Options:
• Hard Disk
• CDROM
• USB-FDD
• Network
To Next Page
Loading...
Need help?
General
