IBM SurePOS 500 User Manual

SurePOS 500 4846-XX5 Technical Reference
Page 47 of 63
• Disabled
Third Boot Device
The system will attempt to boot from the specified device category after trying the second boot device.
Default: CDROM (See CD-ROM Boot Priority)
Options:
• Hard Disk
• CDROM
• USB-FDD
• Network
• Disabled
Fourth Boot Device
The system will attempt to boot from the specified device category after trying the third boot device.
Default: Network
Options:
• Hard Disk
• CDROM
• USB-FDD
• Network
• Disabled
Boot Other Device
If enabled, the system will try all booting all device categories if the first through fourth boot devices fail.
Default: Disabled
Options:
• Disabled
• Enabled
Alternate Boot Sequence
Specifies whether a Magic Packet(TM) powering on the system, pressing <F12> during the POST, or both, will cause
the normal boot sequence to be skipped and a Network-only boot to be attempted. If “Boot Other Device” is enabled,
other boot devices are tried if the Network boot fails.
Default: Both
Options:
• Disabled
• Magic Packet
• <F12> Key
• Both
Tap 3 Times for F11 key
Enters an F11 key scan code if the onboard touchscreen is tapped three times at the prompt. Enables support for
Rescue and Recovery Software.
Default: Disabled
Options:
• Disabled
• Enabled
Setup Touch Silent Mode

IBM SurePOS 500 Specifications

General

Brand	IBM
Model	SurePOS 500
Category	Touch terminals
Language	English