To Next Page

To Previous Page

SurePOS 500 4846-XX5 Technical Reference

Page 54 of 63

Touch Screen I/O

Shows the I/O address used by the touchscreen controller. This item is for information only and cannot be configured.

Touch Screen IRQ

Shows the IRQ used by the touchscreen controller. This item is for information only and cannot be configured.

Serial Port C I/O

Selects the I/O address used for Serial Port C. Using the default value is recommended. If modified, ensure the

selected I/O address does not conflict with other ports as values cannot be shared.

Default: 2E0h

Options:

• Disabled

• 2E0h

• 2E8h

• 2F8h

• 2D8h

• 3E8h

• 3F8h

Serial Port C IRQ

Selects the IRQ used for Serial Port C. Using the default value is recommended. If modified, ensure the selected IRQ

does not conflict with other ports as values cannot be shared.

Default: 11

Options:

• 3

• 4

• 5

• 6

• 7

• 11

Questions and Answers:

Need help?

Do you have a question about the IBM SurePOS 500 and is the answer not in the manual?

IBM SurePOS 500 Specifications

General