IBM System x3650 User Manual

The utility starts automatically when the server is started. You can also locate the
/ect/init.d directory to start the utility and use the following commands to manage
the utility:
smbridge status
smbridge start
smbridge stop
smbridge restart
Using the baseboard management controller utility programs
Use the baseboard management controller utility programs to configure the
baseboard management controller, download firmware updates and SDR/FRU
updates, and remotely manage a network.
Using the baseboard management controller configuration utility
program
Use the baseboard management controller configuration utility program to view or
change the baseboard management controller configuration settings. You can also
use the utility program to save the configuration to a file for use on multiple servers.
Note: You must attach an optional USB diskette drive to the server to run this
program.
To start the baseboard management controller configuration utility program,
complete the following steps:
1. Insert the configuration utility diskette into the diskette drive and restart the
server.
2. From a command-line prompt, type bmc_cfg and press Enter.
3. Follow the instructions on the screen.
Using the baseboard management controller firmware update
utility program
Use the baseboard management controller firmware update utility program to
download and apply a baseboard management controller firmware update and
SDR/FRU data update. The firmware update utility program updates the baseboard
management controller firmware and SDR/FRU data only and does not affect any
device drivers.
Note: To ensure proper server operation, be sure to update the server baseboard
management controller firmware before you update the BIOS code.
To update the firmware, if the Linux or Windows operating-system update package
is available from the World Wide Web and you have obtained the applicable update
package, follow the instructions that come with the update package.
Using the OSA SMBridge management utility program
Use the OSA SMBridge management utility program to remotely manage and
configure a network. The utility program provides the following remote management
capabilities:
56 IBM System x3650 Type 7979: Installation Guide

IBM System x3650 Specifications

General

Processor	Intel Xeon
Drive Bays	3.5"
RAID Support	RAID 0, 1, 10
Power Supply	hot-swap
Network Interface	Dual Gigabit Ethernet
Expansion Slots	6 PCI-Express
Operating System Support	Windows Server, Linux, VMware

Summary

Installation Guide

Welcome

Introduction to the IBM server, thanking the customer.

System x3650 Type 7979

Identifies the specific server model and type.

Safety

General Safety Precautions

General warnings and precautions to read before installing the product.

Electrical Shock Hazard

Critical safety guidelines to prevent electrical shock hazards.

Lithium Battery Safety

Precautions for handling and disposing of lithium batteries.

Laser Product Safety

Warnings and precautions related to laser product installation.

Safe Lifting Practices

Guidelines for safe lifting of heavy server components.

Power Disconnection Safety

Instructions for ensuring complete electrical current disconnection.

Chapter 1. Introduction

Server Model Styles

Describes the two server model styles based on drive bay configurations.

Features and Specifications

Summarizes the key features and technical specifications of the server.

Major Components of the Server

Identifies and illustrates the main physical components of the server.

Chapter 2. Installing Optional Devices

Installation Guidelines

General instructions and precautions before installing optional hardware.

Handling Static-Sensitive Devices

Steps to prevent damage from static electricity when handling components.

Installing a Memory Module

Provides notes on supported DIMM types and installation procedures.

Installing a Hard Disk Drive

Details the installation process for hard disk drives.

Installing an Adapter

Details supported adapter types and installation procedures.

Replacing the ServeRAID SAS Controller

Step-by-step instructions for replacing the SAS controller.

Completing the Installation

Final steps after installing hardware components.

Chapter 3. Server Controls, LEDs, and Power

Front View Controls and LEDs

Identifies controls, LEDs, and connectors on the front panel.

Operator Information Panel

Details the controls, LEDs, and connectors on the operator information panel.

Turning on the Server

Provides methods for turning the server on.

Turning off the Server

Instructions on how to turn off the server and remove power.

Chapter 4. Configuring the Server

ServerGuide Setup and Installation CD

Explains the purpose and usage of the ServerGuide CD for configuration.

RAID Configuration Programs

Introduces programs for configuring RAID arrays.

Baseboard Management Controller (BMC)

Explains BMC functions and remote management capabilities.

Installing OSA SMBridge Management Utility

Steps for installing the OSA SMBridge utility on Windows and Linux.

Chapter 5. Solving Problems

Diagnostic Tools Overview

Overview of tools available for diagnosing hardware problems.

POST Error Codes

Lists abbreviated POST error messages and suggested actions.

Memory Problems

Troubleshooting steps for system memory issues.

Microprocessor Problems

Troubleshooting steps for microprocessor issues.

Light Path Diagnostics

Explains how to use light path diagnostics for error diagnosis.

Appendix A. Getting Help and Technical Assistance

Before You Call

Steps to take before contacting IBM for support.

Getting Help from the World Wide Web

IBM web resources for system and product information.

Appendix B. Notices

Product Recycling and Disposal

Guidelines for recycling and disposing of the product and its components.

Electronic Emission Notices

Statements related to electronic emissions compliance.