EasyManuals Logo
Home>IBM>Computer Hardware>THINKCENTER 8128

IBM THINKCENTER 8128 User Manual

IBM THINKCENTER 8128
290 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #119 background imageLoading...
Page #119 background image
Erasing a lost or forgotten password (clearing CMOS)
This section applies to lost or forgotten passwords. For more information about
lost or forgotten passwords, see Access IBM on your desktop.
Note: Some models have a POV daughter card installed on the system board. In
these models, the password is stored in the EEPROM on the POV card and
cannot be erased. See “Identifying parts on the system board (all machine
types)” on page 38 for the location of the POV card.
To erase a forgotten password:
1. Turn off the computer and all attached devices.
2. Remove the cover. See “Removing the cover” on page 30.
3. Locate the Clear CMOS/Recovery jumper on the system board. See
“Identifying parts on the system board (all machine types)” on page 38.
4. If necessary, see “Replacing adapters” on page 39 to remove any adapters that
impede access to the Clear CMOS/Recovery jumper.
5. Move the jumper from the standard position (pins 1 and 2) to the
maintenance or configure position (pins 2 and 3).
6. Replace the cover and connect the power cord. See “Replacing the cover and
connecting the cables” on page 63.
7. Restart the computer, leave it on for approximately 10 seconds. Turn off the
computer by holding the power switch for approximately 5 seconds. The
computer will turn off.
8. Repeat steps 2 through 4 on page 113..
9. Move the jumper back to the standard (pins 1 and 2).
10. Replace the cover and connect the power cord. See “Replacing the cover and
connecting the cables” on page 63.
Flash update procedures
This section details how to flash (update) the BIOS. Flash updates are available at
http://www.ibm.com/pc/support// on the World Wide Web.
Updating (flashing) BIOS from a diskette or CD-ROM
1. Shut down the operating system and turn off the computer.
2. Insert the flash update diskette or CD-ROM.
3. Turn on the computer. The update begins.
Updating (flashing) BIOS from your operating system
Note: Due to constant improvements being made to the IBM Web site, Web page
content (including the links referenced in the following procedure) is subject
to change.
1. From your browser, type http://www.ibm.com/pc/support// in the address
field and press Enter.
2. Locate the Downloadable files for your machine type.
3. Under Select your product, choose your machine type and click Go.
4. In Downloadable file by category, click BIOS.
5. Under Download files - BIOS by date, click your machine type.
Chapter 8. Additional Service Information 113

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the IBM THINKCENTER 8128 and is the answer not in the manual?

IBM THINKCENTER 8128 Specifications

General IconGeneral
BrandIBM
ModelTHINKCENTER 8128
CategoryComputer Hardware
LanguageEnglish

Related product manuals