About this guide
This document defines preinstallation requirements for IBM XIV Storage System
models 281x-114, and 281x-214, and 281x-314. It is important to ensure that you
meet all requirements to ensure a fast and reliable installation.
If you cannot meet the installation requirements explained in this document, notify
your IBM representative to devise an alternative solution.
Summary of changes
This section details updates made to the planning information for the IBM XIV
Storage System for this release and previous releases.
The following list describes updated made to the planning information for the IBM
XIV Storage System as of March 20, 2018.
v Added information of modem removal from certain regions (see “Rack
components” on page 11).
v Updated remote support information (see “Remote access through a dedicated
network connection” on page 65).
The following list describes updated made to the planning information for the IBM
XIV Storage System as of January 20, 2017.
v Added remote support connection information (see “Remote support for severe
system conditions” on page 67).
The following list describes updated made to the planning information for the IBM
XIV Storage System as of July 11, 2016.
v Added planning for relocation information for encrypted systems (see
“Relocation requirements for encrypted systems” on page 25).
v Updated temperature thresholds and events information (see “Temperature
threshold and events” on page 44).
The following list describes updates made to the planning information for the IBM
XIV Storage System as of December 4, 2015.
v Added new planning for compression information relevant to the use of the IBM
Real-time Compression (RtC) feature with IBM XIV Storage System models
281x-114, 281x-214, and 281x-314 (see Chapter 3, “Planning for compression,” on
page 5).
v Added information related to new IBM XIV Storage System model 281x-314 in
the following sections and subsections:
– Safety and environmental notices. See the following subsection:
- “Site preparation” on page xiv.
– Overview/Planning (see all of Chapter 1, “Overview,” on page 1).
– System specifications (see all of Chapter 2, “System specifications,” on page
3).
– Determining physical configuration and features. See the following
subsections:
- “Rack components” on page 11
© Copyright IBM Corp. 2008, 2018 xvii